30ml semi automatic vertical volumetric liquid paste filling machine

The semi-automatic paste filling machine is mainly for products with medium to high viscosity. The machine has two types: single head paste filling machine and double head paste filling machine.

The vertical filling machine uses the three-way principle that the cylinder drives the piston and the rotary valve to extract and eject high-concentration materials, and controls the stroke of the cylinder with a magnetic reed switch to adjust the filling volume.

It is widely used in medicine, daily chemical, food, pesticide and special industries. The whole machine is made of food-grade SUS304 material, which has the characteristics of corrosion resistance and wear resistance.

Product Detail

Product Tags


The nozzle discharge is not blocked, and it can be disassembled for easy cleaning and maintenance.

The Hopper and the three-way part are connected by handcuffs, Easy to disassemble and clean.

Manual or Automatic modes. Manual mode: equipped with a foot switch, one step for a material. Automatic mode: The interval time can be set, filling speed is completely controlled.

Pneumatic explosion-proof pneumatic components: use explosion-proof pneumatic components, do not need to be connected to electricity, and the internal circuit is clean.

High configuration piston: high temperature resistance, corrosion resistance and acid resistance.

The filling volume can be adjusted by hand, and the filling volume can be fixed after adjustment.


The filling machine is suitable for quantitative filling of sauces, creams, liquids and other materials. such as ketchup, hand cream, facial cleanser, honey, syrup, glass water, shower gel, etc.


Optional Model 5-60ml, 10-125ml, 25-250ml, 50-500ml, 100-1000ml, 250-2500ml, 500-5000ml.
Filling Speed 20-50bot/min
Filling Nozzle Single head or Dual Head
Filling Accuracy ±1%
Power 220/110V 50/60Hz
Air Pressure 0.4-0.9MPa
Gross Weight 36KG
Product size 32x43x155cm


Since the structure of the paste filling machine is a stainless steel shell, please do not scrape its outer surface with sharp and hard tools. If you need to clean the machine, you should scrub the surface of the machine with alcohol.

The cylinder of the equipment has been lubricated before delivery, please do not disassemble the cylinder or add any lubricating oil.

The wearing parts and worn sealing rings of the equipment should be dealt with and replaced in time.

Remark: This equipment needs to be connected to an air compressor, and the air compressor needs to be equipped by yourself or purchased from YODEE.

  • Previous:
  • Next:

  • Write your message here and send it to us